Click image to view full size image
delivery bed with mattress
Technical Parameters
Item:Delivery bed
Table top dimension(mm):2090±20×1020±15
Height(mm):Min.:580±10,Max.:960±20
Bed lifting speed (full load)(mm/s):Up 7.3±3,Down23.8±3
Leg pedal (mm):155±20
Leg plate lifting speed(mm/s):Up6.4±3;Down7.4±3
Back plate folding angle(°):Up fold≥75,down fold≥15
:Hip fold angle(°):≥19
Outboard swing angle(°):≥90
Auxiliary table travel(mm):155±5
Pull handle angle(°):≥50
Fence lift distance(mm):410±20
Hand control
Operation method
Lifting of the bed,Press the "rising" or "down" button on the side of the "Guardrail" to increase or decrease the bed.Legs part of the action,When the auxiliary table is lowered to the lowest position, pulling the handle at the lower end of the auxiliary table can swing the leg plate outward.
Leg rest adjustment:
1. Loosen the screws 1 to adjust the leg rest width inside and out.
2. Loosen the screws 2 to rotate the leg rest.
3. Loosen the screws 3 to adjust the leg rest universally.
The auxiliary station can go up/down.When the auxiliary table is rotated to 45° or 90°, the dirt bowl can be rotated. When the auxiliary table is rotated to 90°, the dirt bowl can be manually moved to the middle position.
http://www.combedcn.com/